Description

Dewalt DCD796N 18v XR BL Combi Drill Bare Unit

The DeWalt DCD796N 18v XR BL Combi Drill Bare Unit is a tool that will suit the drilling and screwdriving needs of tradespeople and DIY enthusiasts alike. It features a 460W brushless motor that keeps this drill performing at maximum capacity for longer. The torque control can be adjusted to 15 different positions so users can drill and drive into a variety of hardened materials. The grip has been ergonomically designed for control and comfort, while an intelligent trigger design gives the user total control over the speed and application of the drill. This product comes as a bare / naked body unit and so batteries and chargers must be purchased separately.

Product Highlights:

 

 

Brushless Motor

Easy to Adjust Torque

Ergonomic Grip

 

 

Features and Benefits:

• 15 position adjustable torque control for consistent screw driving into a variety of materials.
• Intelligent trigger design allows for total control of application.
• Improved ergonomic design with rubber grip over mould improving users comfort.
• Improved air flow to the motor for cooler electronics and increased power.

 

Technical Specification:

Voltage: 18v
Power Output (W): 460
Soft Application Max Torque (Nm): 27
Hard Application Max Torque (Nm): 70
Torque Settings: 15 + Drill
Brake Type: Electric
No. of Gears: 2
LED Job Light: Yes / Delay / Base-mounted
Battery Capacity Indicator: No
Battery Compatibility: 18v Lithium-Ion (XR)
Rotation: Forward / Reverse
Variable Speed Control Trigger: Yes
No Load Speed (RPM) High: 0-2000
No Load Speed (RPM) Med: N/A
No Load Speed (RPM) Low: 0-550
Chuck Type: 3-Jaw / Single Sleeve Keyless / All Metal
Chuck Capacity (mm): 1.5-13.0
Drill Capacity: Concrete (mm): 13
Drill Capacity: Metal (mm): 13
Drill Capacity: Wood (mm): 40
Impact Rate (BPM) High: 0-34000
Impact Rate (BPM) Med: N/A
Impact Rate (BPM) Low: 0-9350
Overall Length (mm): 190
Net Weight (Approx. Kg) with 1.5/2Ah Batt: 1.6
Net Weight (Approx. Kg) with 3/4/5Ah Batt: 1.8
Brushless Motor: Yes
Drilling Concrete Vibration Emission (ah): 11.5 m/s²
Drilling Concrete Vibration Uncertainty (K): 1.6 m/s²
Drilling Metal Vibration Emission (ah): <2.5 m/s²
Drilling Metal Vibration Uncertainty (K): 1.5 m/s²

Supplied With:

1x DCD796 Combi Drill
1x Belt Clip

Naked Machine / Body Only. Not Supplied With Batteries, Case or a Charger